KAP Industries Fire Extinguisher Bracket – Volkswagen Polo MK4 / MK5

This Fire Extinguisher Mount bolts straight into the VW MK4 and MK5 Polo. The front seats can easily slide over the top with zero interference.

Made from 3mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include the Fire Extinguisher in Photo.

Installation

1. Mount the fire extinguisher holder to the KAP Industries Bracket, using the supplied M5 Bolts.
2. Carefully undo front seat bolts
3. Gently raise the front seat and slide the bracket under the rail, lining up the bolt holes.
4. Replace Bolts and hand thread into position
5. Gradually tighten each bolt

Kit Contents

• 1 x VW Polo MK4/MK5 Bracket
• 2 x M5 Stainless Nylocks
• 2 x M5 Stainless Hex Bolts

Note:

• Seat bolts are easily cross-threaded. Please be careful during removal and installation.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries and AutoInstruct take no responsibility for incorrect install.