Fuel-It! Ethanol Sensor Kit – MK7 Golf R
We install a Fuel-It! Ethanol sensor kit in our MK7 Golf R, and connect it to our P3 Gauge for the ultimate monitoring solution.
We install a Fuel-It! Ethanol sensor kit in our MK7 Golf R, and connect it to our P3 Gauge for the ultimate monitoring solution.
AutoInstruct shows you how to remove the front door card on your GC8 / GF8 Subaru Impreza!
This is a really simple tutorial, showing you how to remove the steering wheel airbag on a GC8 Impreza, and many other Subaru vehicles from the same era.
This tutorial will show you how to remove the dash trim that sits in front of the driver’s knees in a GC8 / GF8 Subaru Impreza.
Subaru vehicles from MY1999 onwards, including the Legacy, Liberty, Outback, Baja, Impreza, Forester and Tribeca can be analysed using a Subaru Select Monitor (SSM). SSM is an OBD based tool that allows configuration and customisation of the Engine Control Unit (ECU) and Transmission Control Unit (TCU), which is great for diagnostic and tuning purposes.
We’ll show you how to change your Engine Air Filter. This filter needs to be replaced / cleaned as per your service intervals.
If you're a GC8 enthusiast, you've undoubtably heard of the plagued MY99-MY00 MAF Sensor issues. This sensor often leads to poor engine performance, lean fuel mixtures, and a variety of other issues such as fluctuating idle control or limp mode activation. We constantly hear the phrase 'Replace your MAF Sensor' as the first point of call to almost every MY99-00 engine problem. At $250 AUD each, it's certainly not a cheap test!
How to replace the MAF sensor on your MY99 Subaru WRX!
This tutorial will show you how to remove the front bumper bar on your MK7 Golf R / GTI.
We’re going to show you how to install an aftermarket intercooler on a MK7 Golf R.
This guide will show you how to install a P3 Cars Analog Boost Sensor.