034Motorsport Billet + Spherical Dogbone Mount, Audi 8V/8S A3/S3/TT/TTS & VW MKVII GOLF/GTI/R
034Motorsport Billet + Spherical Dogbone Mount, Audi 8V/8S A3/S3/TT/TTS & VW MKVII GOLF/GTI/R
034Motorsport’s Billet + Spherical Dogbone Mount for 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R is the new standard in performance and durability.
$655.00
Available on back-order
Product Description
034 Motorsport Billet + Spherical Dogbone Mount, Audi 8V/8S A3/S3/TT/TTS & VW MKVII GOLF/GTI/R
034Motorsport’s Billet + Spherical Dogbone Mount for 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R is the new standard in performance and durability. This dogbone mount was engineered with performance in mind, manufactured from billet aluminium and stainless steel, and features a genuine Aurora Spherical Bearing to maintain proper articulation and reduce NVH transfer. The Billet + Spherical Dogbone Mount is machined and assembled in-house, designed to eliminate the slop associated with the factory mount, and will better withstand the forces generated by hard launches.
The result is a locked-down drivetrain, crisper shifting, and virtually no wheel hop. The Motorsport Dogbone Mount will cause some increase in noise, vibration, and harshness (NVH) inside of the cabin.
This upgrade was extensively track-tested on 034Motorsport’s MkVII Volkswagen GTI & 8V Audi S3 before release.
Features
- Bolt-In Performance Upgrade for Factory Dogbone Mount
- Reduced Drivetrain Slop & Engine Movement Under Load
- More Direct Power Transfer & Improved Shifting Feel
- Increased Strength & Improved Durability vs. Factory Part
- T6-6061 Billet Aluminium Body
- 303 Stainless Steel Spacers
- Genuine Aurora Spherical Bearing
- Rebuildable Design
- New Factory Stretch Bolts Included!
Installation Instructions
Please Note: We recommend pairing this dogbone mount arm with our MQB Dogbone Mount Insert V1 or V2 for the ultimate reduction in drivetrain slop.
Product Specifications
This Product Includes:
- Fully Assembled Billet Spherical Dogbone Mount
- Three New Replacement OEM Stretch Bolts
- Billet Aluminum MQB Upper Dogbone Mount Insert
Manufacturer Specified Fitment
- 2015 – Present Audi A3/S3 (8V – MQB)
- 2016 – Present Audi TT/TTS (MkIII – MQB)
- 2015 – Present Volkswagen Golf/GTI/R (MkVII – MQB)
- Does not fit 2017+ Volkswagen Mk7.5 (facelift) Golf R
1 review for 034Motorsport Billet + Spherical Dogbone Mount, Audi 8V/8S A3/S3/TT/TTS & VW MKVII GOLF/GTI/R
You must be logged in to post a review.
Vehicle Fitment
This vehicle fitment list has been provided as a guideline only. Please check the product description for exact vehicle compatibility.
| Make | Model | Generation |
|---|---|---|
| Make | Model | Generation |
| Audi | S3 | 8V |
| Audi | TT | 8S |
| Audi | TTS | 8S |
| Volkswagen | Golf | MK7 |
| Volkswagen | Golf | MK7 |
| Volkswagen | Golf | MK7 |
| Volkswagen | Golf | MK7 |
mitchtoeroek (verified owner) –
Heads up. Beautifully made product but does not fit on a MK7.5 Golf R. The two front bolts are larger than on the MK7. I did install the front and lower 034Motorsport dogbone inserts with the standard arm. All torqued correctly. Definitely adds a little more responsiveness and NVH. With a resonator delete and Akrapovic exhaust I now do have a small amount of drone in race mode which wasn’t there prior to this install. Makes the car feel more racey which I like. NVH and drone only noticeable when starting and in the low rev range.