Introduction
In this tutorial we’ll show you how to change the oil in your VE Commodore, VF Commodore or Chevrolet Camaro, all of which share either the LLT, LY7 or LFX Engines.
Difficulty Rating
Moderate
Tools/Parts Required
- Oil Pan
- Funnel
- Socket Set – We recommend Bahco!
- Breaker Bar
- Torque Wrench
- Oil Filter – Sold by AutoInstruct
- Approx. 6.5L of 5w-30 or similar oil
Warning
Work at your own risk. This work is inherently dangerous and must only be carried out by a qualified mechanic.
AutoInstruct will not be held responsible for damage to your vehicle or personal injury / death as a result of the information we provide.
AutoInstruct will not be held responsible for damage to your vehicle or personal injury / death as a result of the information we provide.
Video
Did you find this guide helpful? Consider sharing it to help other car enthusiasts
Facebook
Twitter
This Post Has 15 Comments
Thank u very much gr8 post…
Thanks! We’re glad we could help!
Hi if possible can you put a video to show how to change coolant in VE series 2 .
Hey! Unfortunately we no longer own our VE Commodore project vehicle, so this won’t be possible.
Good write up thanks.
I see you have a Growler intake.
How does it go?
The growler is awesome! Nice loud induction noise.
Could you advise how to check and change transmission oil in lfx sv6 commodore series2 plz coz there is no dipstick…
Hey, We wish we could however we don’t have our VE Commodore anymore. Generally speaking you use the fill hole to see how full it is. It should be level with the hole (I.E You can’t fill it anymore otherwise it will leak out). There is a drain plug to empty the fluid.
Wow your how to videos are the BEST, so clear.
I just wish you had done one on the transmission oil and filter change, for my (2011) VE series 2, 3L sportswagon .
Sick of paying too much for services, and got all the tools, so at 190000km time to start to do it myself.
(Worked on the old vs for years)
Thanks for all your tips and videos.
Hi Cole, Thanks for the feedback. If we ever get our hands on a VE Commodore again, we’ll be sure to do it.
How do you go when you change bulbs with the growler on.
Looks tight.
Cheers peter.
Hi Peter,
It does get in the way slightly, however takes 2-minutes to remove the growler. Very simple.