Introduction

We’ll show you how to install a Burger Motorsports JB1 Plug and Play Tune! The JB1 has proven gains and results on the EA888 engine, and is like no other tune. This process can be done in under 30 minutes, and can be easily removed without a trace.

Please Note: If you are fitting the USB data cable you must remove the grey case on the connector otherwise it will not fit in the enclosure.

Difficulty Rating

Moderate

Tools/Parts Required

Video

Step 1

Plug D

When attempting to disconnect Plug D on the bottom of the engine, gently lift the clip with a flathead screwdriver, then gently pull the connection apart.

Did you find this guide helpful? Consider sharing it to help other car enthusiasts

Share on facebook
Facebook
Share on twitter
Twitter

Leave a Reply

Close Menu
×

Cart