Introduction
This tutorial will show you how to install a KAP Industries Fire Extinguisher Bracket in a MK7 Golf. This install takes approximately five minutes, and is completely reversible.
Difficulty Rating
Tools/Parts Required
- M10 Triple Square Bit
- KAP Industries Fire Extinguisher Bracket
Warning
Work at your own risk. This work is inherently dangerous and must only be carried out by a qualified mechanic.
AutoInstruct will not be held responsible for damage to your vehicle or personal injury / death as a result of the information we provide.
AutoInstruct will not be held responsible for damage to your vehicle or personal injury / death as a result of the information we provide.
Step 1
Mount your fire extinguisher to the KAP Industries bracket using the supplied bolts.
You can mount the extinguisher anywhere along bracket using the various mounting holes.
Mount your fire extinguisher to the KAP Industries bracket using the supplied bolts.
You can mount the extinguisher anywhere along bracket using the various mounting holes.
Step 2
Using the M10 Triple Square Bit, carefully remove both front seat bolts.
Using the M10 Triple Square Bit, carefully remove both front seat bolts.
Step 3
Place the bracket over the rail, and align the bolt holes.
Place the bracket over the rail, and align the bolt holes.
Step 4
Re-install the bolts, and gently tighten to manufacturers specifications.
Re-install the bolts, and gently tighten to manufacturers specifications.
Step 5
Done! It’s that simple!
Done! It’s that simple!
Did you find this guide helpful? Consider sharing it to help other car enthusiasts
Facebook
Twitter
