P3 Cars V3 OBD2 Vent Multi-Gauge – Audi A4 / S4 / A5 / S5 B8
P3 Cars V3 OBD2 Vent Multi-Gauge – Audi A4 / S4 / A5 / S5 B8
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment.
From: $700.00
Product Description
P3 Multi-Gauge for Audi A4 / A5 B8
P3 V3 Gauge Features
- Plug and Play Install – plugs directly into your OBD2 port
- OEM Integration – installs in your vent for a sleek install while retaining air flow
- Versatility – read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing – read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
- Includes Digital Display, Custom OBD Wire Harness, Control Box.
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don’t care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don’t.
No more bulky pillar or column pods… No more squinting to read tiny pixelated screens… While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it’s bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We’ve got that covered too.
We’ve torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Please Note
- The gauge does not come pre-installed in the air conditioner vent. Vent is not included.
- We only stock gauges for Right Hand Drive vehicles
P3 Cars SKU:
3P3AB8X
Manufacturer Specified Fitment
Applicable Models
- Audi A4 / S4 / RS4 – B8
- Audi A5 / S5 / RS5 – B8
1 review for P3 Cars V3 OBD2 Vent Multi-Gauge – Audi A4 / S4 / A5 / S5 B8
You must be logged in to post a review.
Vehicle Fitment
This vehicle fitment list has been provided as a guideline only. Please check the product description for exact vehicle compatibility.
| Make | Model | Generation |
|---|---|---|
| Make | Model | Generation |
| Audi | A4 | B8 |
| Audi | A5 | B8 |
| Audi | RS4 | B8 |
| Audi | RS5 | B8 |
| Audi | S4 | B8 |
| Audi | S5 | B8 |
Tristan (verified owner) –
As usual, Luke was super helpful with the purchase. Great turn around time for delivery. The gauge is amazing and with the added track pack software, it does everything I want it to and more!
Can be a pain to install, but loads of youtube videos on how it’s done. My tip would be to use twist-ties to hold the vent slats in place when putting it all back together.
Staff @ AutoInstruct –
Thanks for the feedback Tristan!