KAP Industries Fire Extinguisher Bracket – Subaru BRZ / Toyota GT86

This Fire Extinguisher Bracket fits both Drivers Side and Passenger Side of the Toyota GT86 / Subaru BRZ / Scion FRS. Works on Left Hand side or Right Hand side!

Made from 2mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

If you want one for both sides of your car, just add 2 in your cart!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser-cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher in photo. 

Installation

1. Mount fire extinguisher holder to the KAP Industries Bracket, using the supplied M5 Bolts
2. Carefully undo the front seat bolts
3. Place bracket under the seat rails
4. Replace Bolts and hand thread into position
5. Tighten up each bolt gradually

Kit Contents

• 1 x Subaru BRZ / Toyota GT86 Bracket
• 2 x M5 Stainless Nylocks
• 2 x M5 Stainless Hex Bolts

Note:

• Seat bolts are easily cross-threaded. Please be careful during removal and installation.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries and AutoInstruct take no responsibility for incorrect install.