KAP Industries Fire Extinguisher Bracket – Toyota FJ Cruiser /  Prado 120/150

Fire Extinguisher Bracket designed for Toyota FJ Cruiser and Prado 120 / 150 Series

Works perfect with Electric seats!

This bracket fits both sides of the vehicle! Whether it be LHD or RHD.

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher bracket in photos. 

How to Install:

1: Unclip plastic seat bolt covers, (little bit of wiggling gets them off but be careful not to break them)

2. Undo front seat bolts,

3. Place bracket over seat bolt holes and slip the bolts back in,

4. You may need to wiggle the seats to get them in easily. They will go!

5. Tighten up each bolt gradually.

Kit Contents

• 1 x Toyota FJ / Prado 120/150 Bracket
• 2 x M5 Stainless Nylocks
• 2 x M5 Stainless Hex Bolts

NOTE: Seat bolts are easily cross-threaded. Please be careful during removal and installation.

Note:

• Seat bolts are easily cross-threaded. Please be careful during removal and installation.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries and AutoInstruct take no responsibility for incorrect install.